FILM BLOWING GRADE PLA Modified Material
PLA+PBAT+STARCH
Item Code:YPMH-S200
Recommended application
Shopping vest bag, wrist bag, roll bag, food preservation bag; Electronic product packaging film, household appliance packaging film, medical hygiene film, etc
Product characteristics
1. Good coloring performance, stable melt strength, and can be directly processed into various films;
2. It is usually light white or light yellow, has fragrance, is easy to be decomposed by microorganisms, and has natural antistatic property;
3. Good heat stability of raw materials, good recyclability of leftover materials, high temperature and strong shear force;
4. This product has low moisture content. It is vacuum packed and can be used after opening.
Material properties
Item | test method | Conditions for testing | Unit | Result[1] |
Melt flow rate | ISO 1133 | 190℃,2.16 kg | g/10min | 4.0-7.0 |
Density | ISO 1183 | 23℃ | g/cm3 | 1.27-1.32 |
Melting point | DSC | - | ℃ | 110-130 |
[1] The above data are measured values, not guaranteed values. | ||||
Processing parameters | ||||
Temperature | Typical value[2] | Reference range | ||
Melting temperature | 120℃ | 115-125℃ | ||
Temperature of film blowing heating area | Posterior segment | 125℃ | 120-130℃ | |
Middle segment | 130℃ | 125-135℃ | ||
Anterior segment | 135℃ | 130-140℃ | ||
Mould head temperature | 135℃ | 130-140℃ | ||
Upper limit of processing temperature | 180℃ | |||
[2] The above data are typical values and are only for reference. In the actual processing process, the parameters can be adjusted appropriately. | ||||
Typical film properties[3] | ||||
Characteristic[4] | test method | Conditions for testing | Unit | Typical value[5] |
Tensile strength longitudinal / transverse | ISO 527 | 25℃ | MPa | 21/12 |
Elongation at break longitudinal / transverse | ISO 527 | 25℃ | % | 250/600 |
Dart impact | ISO 7765-1 | 25℃ | g | 150 |
[3] Typical films are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns; | ||||
[4] The data are measured by the newly produced film and can not be used as the basis for judging material quality; | ||||
[5] The above data are typical values, not guaranteed values | ||||
Precautions storage and transportation
1. If the package is damaged accidentally, please dry the material at 80 ℃ for 2-4 hours before use.
2. Before extruding, blowing or casting the film, the equipment shall be carefully cleaned to avoid the existence of impurities affecting the product quality.
Note: since the use conditions and applicable laws may vary from place to time, the customer is responsible for determining whether the products and product information in this document are suitable for the customer's use, and ensuring that his workplace and the way of handling products comply with applicable laws and other government regulations. All implied warranties under this document regarding the marketability of the product or the suitability for a particular purpose are expressly excluded.
The net weight is 25kg. It is transported as ordinary chemicals. Please store it in a dry and ventilated environment to avoid moisture and heating.
Note: since the use conditions and applicable laws may vary from place to time, the customer is responsible for determining whether the products and product information in this document are suitable for the customer's use, and ensuring that his workplace and the way of handling products comply with applicable laws and other government regulations. All implied warranties under this document regarding the marketability of the product or the suitability for a particular purpose are expressly excluded.
FILM BLOWING GRADE PLA Modified Material
PLA+PBAT+STARCH
Item Code:YPMH-S200
Recommended application
Shopping vest bag, wrist bag, roll bag, food preservation bag; Electronic product packaging film, household appliance packaging film, medical hygiene film, etc
Product characteristics
1. Good coloring performance, stable melt strength, and can be directly processed into various films;
2. It is usually light white or light yellow, has fragrance, is easy to be decomposed by microorganisms, and has natural antistatic property;
3. Good heat stability of raw materials, good recyclability of leftover materials, high temperature and strong shear force;
4. This product has low moisture content. It is vacuum packed and can be used after opening.
Material properties
Item | test method | Conditions for testing | Unit | Result[1] |
Melt flow rate | ISO 1133 | 190℃,2.16 kg | g/10min | 4.0-7.0 |
Density | ISO 1183 | 23℃ | g/cm3 | 1.27-1.32 |
Melting point | DSC | - | ℃ | 110-130 |
[1] The above data are measured values, not guaranteed values. | ||||
Processing parameters | ||||
Temperature | Typical value[2] | Reference range | ||
Melting temperature | 120℃ | 115-125℃ | ||
Temperature of film blowing heating area | Posterior segment | 125℃ | 120-130℃ | |
Middle segment | 130℃ | 125-135℃ | ||
Anterior segment | 135℃ | 130-140℃ | ||
Mould head temperature | 135℃ | 130-140℃ | ||
Upper limit of processing temperature | 180℃ | |||
[2] The above data are typical values and are only for reference. In the actual processing process, the parameters can be adjusted appropriately. | ||||
Typical film properties[3] | ||||
Characteristic[4] | test method | Conditions for testing | Unit | Typical value[5] |
Tensile strength longitudinal / transverse | ISO 527 | 25℃ | MPa | 21/12 |
Elongation at break longitudinal / transverse | ISO 527 | 25℃ | % | 250/600 |
Dart impact | ISO 7765-1 | 25℃ | g | 150 |
[3] Typical films are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns; | ||||
[4] The data are measured by the newly produced film and can not be used as the basis for judging material quality; | ||||
[5] The above data are typical values, not guaranteed values | ||||
Precautions storage and transportation
1. If the package is damaged accidentally, please dry the material at 80 ℃ for 2-4 hours before use.
2. Before extruding, blowing or casting the film, the equipment shall be carefully cleaned to avoid the existence of impurities affecting the product quality.
Note: since the use conditions and applicable laws may vary from place to time, the customer is responsible for determining whether the products and product information in this document are suitable for the customer's use, and ensuring that his workplace and the way of handling products comply with applicable laws and other government regulations. All implied warranties under this document regarding the marketability of the product or the suitability for a particular purpose are expressly excluded.
The net weight is 25kg. It is transported as ordinary chemicals. Please store it in a dry and ventilated environment to avoid moisture and heating.
Note: since the use conditions and applicable laws may vary from place to time, the customer is responsible for determining whether the products and product information in this document are suitable for the customer's use, and ensuring that his workplace and the way of handling products comply with applicable laws and other government regulations. All implied warranties under this document regarding the marketability of the product or the suitability for a particular purpose are expressly excluded.
